Weather Station (1)

• Select “Weather Station” on left menu

• Chose your type of weather station from “Add weather station” drop-down menu.

• Then you are requested to make further selections for your weather station:

• • You can give it a name
  • Select type of connection. For a direct connection of your weather this can be “serial”, “USB serial”, “USB HID” or “TCP/IP” (depending of your station's type and available interfaces of your Meteohub HW).
  • • “USB HID” does not need further device info. Use USB HID for WMR-100/200, WMRS-200, RMS-300/600, TE-923, WH-1080.
    • “USB serial” needs a device name. Select “/dev/ttyUSB0” for that. USB serial is used with serial weather stations using a RS232-USB converter or USB Vantage or USB RFXCOM.
    • “Serial” needs a Meteohub HW with native RS-232 interface (e-boxes, ALIX). Select “/dev/ttyS0” or “/dev/ttyS1” as interface. Serial weather stations are WMR-928 or serial Vantage.
    • “TCP/IP” needs an IP or Hostname to connect to followed by a colon and port number (“192.168.1.123:10001” for example). TCP/IP weather stations are Vantage with WLIP or LAN/WLAN versions of RFXCOM.