Installation

• This slide deck does not describe installation of Meteohub onto your hardware, but does focus on the steps after having done installation.

• Please refer to the installation chapters of Meteohub manual in download section “Meteohub Documentation” at “www.meteohub.de”

• Installation procedure varies according to selected HW platform:

• • 2-step approach on NSLU2: First firmware of NSLU2 has to be flashed with a Meteohub firmware, then USB stick has to be setup with Meteohub runtime environment.
  • 2-step approach on fit-PC Slim, ALIX.1D and e-boxes: First, a bootable USB stick has to be prepared. Target system gets booted by this USB stick, which in a second step installs Meteohub runtime environment onto empty CF card already plugged-in at target system.
  • 1-step approach on ALIX.3D2: CF card image has to be extracted from USB stick image (refers to previous paragraph). This image gets directly transferred to CF card and CF card is then plugged into ALIX.3D2 internal CF card slot.
  • 1-step approach on VMware: Meteohub VMware image gets directly installed on target VMware environment.